A333 GR. 3./ GR. 6 Carbon Steel Pipes | IBR A333 Certified Carbon Steel Pipes

Suppliers, stockist, exporter & importer of A333 GR. 3./ GR. 6 Seamless Carbon Steel Pipes & Tubes | A333 GR. 3/ GR. 6 Carbon Steel ERW Pipes & Tubes | A333 GR. 3/ GR. 6EFW Carbon Steel Pipes

Quick delivery guaranteed for every size ASTM A333 Carbon Steel Seamless Pipes tube exporter in India

Stainless steel tube series: Type 304 | Type 304L | Type 304H | Type 316 | Type 316L | Type 316H | Type 317L | Type 321 | Type 347 | Type 410 | Type 904L | UNS S32750 Duplex | UNS S32205 Duplex | UNS S31803 Duplex

Contents:

• A333 GR. 3/ GR. 6 Carbon Steel Pipes
• A333 GR. 3/ GR. 6 Carbon Steel Pipes Dimensional Range & specification
• A333 GR. 3/ GR. 6 Carbon Steel Pipes sizes & stock
• A333 GR. 3/ GR. 6 Carbon Steel Pipes price
• A333 GR. 3/ GR. 6 Carbon Steel Pipes packaging
• A333 GR. 3/ GR. 6 Carbon Steel Pipes manufacturing process
• Dimensions of tubes and pipes

A333 GR. 3/ GR. 6 Carbon Steel Pipes

Pacific Steel Overseas is a Steel Tube Distributor that stock and processes the finest quality industrial steel products. Large inventories of ASTM A106 grade B carbon steel, tool steel, alloy steel, and stainless steel are available with Pacific Steel. Pacific specializes in quick delivery. We house a large inventory of A333 GR. 3/ GR. 6 Carbon Steel Pipes & various grades, sizes of steel tube, allowing us to rapidly supply you with the product you need, when you need it. We offer a rapid response system that will give you a price quote within minutes. The Alloys Unlimited quality management program ensures that all materials comply with ASTM, AISI, or SAE specifications and all products are fully certified.

The environment management system of the company is certified according to the requirements of ISO 9001:2008, 14001, 18001 & PED. Few of the major brands we represent are Arcelor Mittal, Sumitomo, Tenaris A333 GR. 3/ GR. 6 Carbon Steel Pipes, Benteler, Jazeera Steel, Hyundai HYSCO, Arabian Pipes Company, Froch, etc. Our materials are approved by Saudi ARAMCO, SABIC, SHELL, ADNOC, GASCO, PDO, KNPC, KOC, QATAR Gas, SGC etc.

Pacific Steel also offers a wide range of A333 GR. 3/ GR. 6 Carbon Steel Pipes, 316 Seamless Tubing, 316 Seamless Pipe, ss 316l Seamless Pipe, 304 Seamless Tube, 304 Seamless Stainless Steel Tubing & Hydraulic Tube etc. We can meet most ASME, ASTM, AMS, and military specifications, and can cross-reference to most international standards, including full DIN 3.1b, full 3.1/3.2 Certifcation and NACE requirements.

A333 GR. 3/ GR. 6 Carbon Steel Pipes Dimensional Range & Standard Specification

ASTM A333 CARBON STEEL SEAMLESS PIPES FOR LOW TEMPERATURE SERVICE

This specification covers nominal (average) wall seamless and welded carbon and alloy steel pipe intended for use at low temperatures. Several grades of a steel are included as listed in Table 1. Some product sizes may not be available under this specification because heavier wall thicknesses have an adverse affect in low-temperature impact properties.
Supplementary Requirement S1 of an optional nature is provided. This shall apply only when specified by the purchaser.

The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. The inch-pound units shall apply unless the “M” designation of this specification is specified in the order.

This specification covers nominal (average) wall seamless and welded carbon and alloy steel pipe intended for use at low temperatures. Several grades of ferritic steel are included. Some product sizes may not be available under this specification because heavier wall thicknesses have an adverse affect on low-temperature impact properties.

Chemical Requirements Composition, % Element Grade 1 Grade 3 Grade 6 Carbon, max 0.30 0.19 0.30 Manganese 0.40 – 1.06 0.31 – 0.64 0.29 – 1.06 Phosphorous, max 0.025 0.025 0.025 Sulfur, max 0.025 0.025 0.025 Silicon 0.18 -0.37 0.10 min Nickel 3.18 – 3.82   For each reduction of 0.01% carbon below 0.30%, an increase of 0.05% manganese above 1.06% would be permitted to a maximum of 1.35% manganese. When Grade 6 is ordered under this specification, supplying an alloy grade that specifically requires the addition of any element other than those listed for the ordered grade is not permitted. However, the addition of elements required for the deoxidation of the steel is permitted. Tensile Requirements he material shall conform to the requirements as proscribed: Grade 1 Grade 3 Grade 6 psi MPa psi MPa psi MPa Tensile Strength, min 55,000 380 65,000 450 60,000 415 Yield Strength, min 30,000 205 35,000 240 35,000 240 Longitudinal  Transverse Longitudinal  Transverse Longitudinal  Transverse Elongation in 2 in. or 50 mm, (or 4D), min, %: Basic minimum elongation for walls 5/16 in. [8 mm] and over in thickness, strip tests, and for all small sizes tested in full section 35 35 30 20 30 16.5 When the standard round 2-in. or 50-mm gage length or proportionally smaller size test specimen with the gage length equal to 4D (4 times the diameter) is used 28 20 22 14 22 12 For strip tests, a deduction for each 1/32in. [0.8 mm] decrease in wall thickness below 5/16 in. [8 mm] from the basic minimum elongation of the following percentage 1.75 1.25 1.50 1.00 1.50 1.00 Elongation in 2 in. or 50 mm, min, %:   Wall Thickness Grade 1 Grade 3 Grade 6 in. mm Longitudinal  Transverse Longitudinal  Transverse Longitudinal  Transverse 5/16 (0.312) 8 35 25 30 20 30 16 9/32 (.281) 7.2 33 24 28 19 28 15 1/4 (.250) 6.4 32 23 27 18 27 15 7/32 (.219) 5.6 30 26 26 3/16 (.188) 4.8 28 24 24 5/32 (.156) 4 26 22 22 1/8 (.125) 3.2 25 21 21 3/32 (.094) 2.4 23 20 20 1/16 (.063) 1.6 21 18 18 Impact Requirements For Grades 1, 3 and 6, the notched-bar impact properties of each set of three impact specimens, including specimens for the welded joint in welded pipe with wall thicknesses of 0.120 in. [3 mm] and larger, shall not be less than the values prescribed: Size of Specimen, min Minimum Average Notched Bar Impact Value of Each Set of Three Specimens Minimum Notched Bar Impact Value of One Specimen Only of a Set Impact Temperature ft-lbf J ft-lbf J Grade Min Impact Test Temp 10 by 10 13 18 10 14 F C 10 by 7.5 10 14 8 11 1 -50 -45 10 by 6.67 9 12 7 9 3 -150 -100 10 by 5 7 9 5 7 6 -50 -45 10 by 3.33 5 7 3 4 10 by 2.5 4 5 3 4 Mechanical Testing Transverse or Longitudinal Tension Test and Flattening Test, Hardness Test, or Bend Test For material heat treated in a batch-type furnace, tests shall be made on 5% of the pipe from each treated lot. For small lots, at least one pipe shall be tested. For material heat treated by the continuous process, tests shall be made on a sufficient number of pipes to constitute 5% of the lot, but in no case less than 2 pipe. Hydrostatic Test Impact Test – One notched bar impact test, consisting of breaking three specimens shall be made from each heat represented in a heat-treatment load on specimens taken from the finished pipe.