Suppliers and Dealer of Brass Bar, ASTM B62 Brass Round Bars, Alloy UNS C36000 Bright Bar, Brass Round Bar Hexagonal Bar, Brass Square Bars, Brass Carpenter Round Bar, Brass Rods in Vadodara – Gujarat, India.
Brass Round Bars, Brass Forged Bars Exporter, Suppliers of ASTM B62 Brass Hex Bar, Brass Round Bar, Brass Square Bar Manufacturer in India.
Ganpat Industrial Corporation is one of the pioneer distributor & trader of Brass Round Bars, which may also be prone to ‘knife line attack’ in the heat – affected zones of welds, very close to the fusion zone where the carbo – nitrides have re – dissolved in the solid steel matrix. The weldability of Brass Square Bars can be assumed to be similar, where neither of the grades can be expected to weld ‘easier’ or ‘better’ than – the – other. Niobium stabilized fillers (welding consumables) should be used for welding Brass Flat Bars, especially where elevated temperature weld strength may be important. In other circumstances, Brass Threaded Bars should give a matching weld metal aqueous corrosion resistance to that of the ‘parent’ material. Resistance to sensitization is achieved in Brass Hollow Bars with titanium additions to stabilize the structure against chromium carbide precipitation, which is the source of sensitization. Brass Hexagonal Bars are more resistant to general corrosion and pitting / crevice corrosion than the conventional chromium – nickel austenitic stainless steels. Brass Triangular Bars also offer higher creep, stress – rupture and tensile strength at elevated temperature. This significantly reduces susceptibility to sensitization of Brass Bars in service by limiting the formation of chromium carbides. Brass Rods is fully heat treatable (solution heat treatment plus aging) in sections up to 25mm and can be employed up to around 400 Degree C.
Brass Black Bar, Hot Rolled Brass Round Bar, Brass Round Bar Triangular Bar, Brass Cold Drawn Round Bar, Brass Polished Bar, Specialist Distributor of ASTM B62 Brass Threaded Bar, Brass Flat Bar, Exporter in India.
Brass Round Bar Specifications |
||
| Specifications | : | ASTM B62 / ASTM SB62 |
| Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Size |
: | 5 mm To 500 mm |
| Diameter | : | 0.1 mm to 100 mm |
| Length | : | 100 mm To 3000 mm Long & Above |
| Finish | : | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Tolerance | : | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Form | : | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
Types of Brass Bars / Rods
 |
Brass Bright Bar | Brass Bright Bar Bright Brass Bar UNS C36000 Bright Bar ASTM B62 Brass Bright Bar |
 |
Brass Hex Bar | Brass Hex Bar Hexagonal Brass Bar Carpenter Hex Bar UNS C36000 Hexagonal Bar ASTM B62 Brass Hex Bar |
 |
Brass Square Bar | Brass Square Bar Square Brass Bars UNS C36000 Square Bar ASTM B62 Brass Square Bars |
 |
Brass Rectangular Bar | Brass Rectangular Bar Rectangular Brass Bars Carpenter Rectangular Bar UNS C36000 Rectangular Bars ASTM B62 Brass Rectangular Bar |
 |
Brass Flat Bars | Brass Flat Bar Carpenter Flat Bars Flat Brass Bars UNS C36000 Flat Bars ASTM B62 Brass Flat Bars |
 |
Brass Polished Bar | Brass Polished Bar Polished Brass Bar UNS C36000 Polished Bars ASTM B62 Brass Polished Bar |
 |
Brass Threaded Bar | Brass Threaded Bar Threaded Brass Bar UNS C36000 Threaded Bar ASTM B62 Brass Threaded Bar |
Brass Round Bar Chemical Composition
| Brass | Cu | Fe | Pb | Zn |
| Min./Max. | 60.0-63.0 | 0.35 | 2.5-3.0 | Rem. |
| Nominal | 61.5 | – | 2.7 | 35.4 |
Brass Round Bar Physical Properties
| Properties | US Customary |
| Melting Point -Liquidus | 1650 F |
| Melting Point -Solidus | 1630 F |
| Density | 0.307 lb/in3at 68 F |
| Electrical Resistivity | 39.90 ohms – cmil/ft @ 68 F |
| Electrical Conductivity | 26 %IACS @ 68 F |
| Thermal Conductivity | 67 Btu · ft/(hr · ft2·oF)at 68F |
| Modulas of Elasticity in Tension | 14000 ksi |
Brass Bars Price List
- Brass bars
US $1000-2500 / Ton - astm B62 Brass rods
US $2000-3000 / Ton - Alloy hex bar 20
US $1.5-4.5 / Kilogram - ASTM B62 Brass round bar
US $1800-2300 / Ton - Brass square bar
US $1550-2400 / Ton - Brass bar manufacturer
US $1800-2300 / Ton - ASTM B62 Gr. 20 rods
US $1300-2600 / Metric Ton
Brass Round Bar Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Brass Rods Test Certificates
We at GIC provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
ASTM, ASME and API Brass Bars Value Added Services
Material Testing:
We at Ganpat Industrial Corporation ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and MacroTest
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Brass Rods Packaging
=
We focus on every procedure to assure quality, the package we usually take is pack Brass Round Bar with environmental poly bags, and then in free fumigation wooden cases or wooden palte. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your Brass Round Bar pack requirements. Lot of emphasis is placed on the packing and packaging. The AISI 20 Round Bar are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps.
Related Products